THE DRAIN SEAL - THE ULTIMATE STORM DRAIN SEAL
Designed to Perform - Built to Last
‘The drain cover seal was produced in reaction to situations arising from operatives placing site spoil close to open drains and gullies in poor weather conditions.’
- Made from recycled plastic
- Manufactured in recycled Yellow or Blue plastic
- Designed with an anti-slip surface and chamfered edges
- Personalise your Drain Seal with your own moulded Corporate Logo
The locking system is produced to be durable, quickly fitted and detachable
Technical Specifications
Drain Cover
- Material. Polyethylene 100
- Dimension. 450 mm 450mm
- Chamfered Edgers
- Anti slip surface
- Depth 25 mm
- 30 mm foam sealing sheet
Locking Mechanism
- Galvanised steel
- Retractable locking pin
Site Application
When it is suspected that the drain or watercourse may be at risk of contamination by site spoil or environmental spillage, the first course of action will be to place the drain cover seal over the first gully to be affected. See Fig 1.
 
Fig 1.
Once the drain cover seal has been placed over the gully by moving the locking device into the closed position this will allow the locking pin to connect with the underside of the drains finials and lock the drain cover in place. See Fig 2.
 
Fig 2.
Once the locking mechanism is moved to the closed position, a 15 mm socket retracts the locking pin allowing the foam gasket to form a seal around the drain. See Fig 3.
 
Fig 3.
2008 PRICE LIST
Call today for a free demonstration: 07971 573555
List Price: £79.00
Quantity Discount:
1 – 4 : Nett
5 – 9 : Less 5%
10 – 24 : Less 10%
25 – 49 : Less 15%
50 – 99 : Less 20%
100+ : Less 25%
A minimum order quantity of 50 units applies for personalised Drain Seals at no extra charge.
Above prices exclude carriage and VAT which is charged extra at the prevailing rate.
Call SMR on 01252 710772 to arrange a free demonstration
|